| Modulation | CA bandwidth Class B and C / Smallest Component Carrier Transmission Bandwidth Configuration | MPR (dB) | |||
|---|---|---|---|---|---|
| 25 RB | 50 RB | 75 RB | 100 RB | ||
| QPSK | > 8 and ≤ 25 | > 12 and ≤ 50 | > 16 and ≤ 75 | > 18 and ≤ 100 | ≤ 1 |
| QPSK | > 25 | > 50 | > 75 | > 100 | ≤ 2 |
| 16 QAM | ≤ 8 | ≤ 12 | ≤ 16 | ≤ 18 | ≤ 1 |
| 16 QAM | > 8 and ≤ 25 | > 12 and ≤ 50 | > 16 and ≤ 75 | > 18 and ≤ 100 | ≤ 2 |
| 16 QAM | > 25 | > 50 | > 75 | > 100 | ≤ 3 |
| 64 QAM | ≤ 8 and allocation wholly contained within a single CC | ≤ 12 and allocation wholly contained within a single CC | ≤ 16 and allocation wholly contained within a single CC | ≤ 18 and allocation wholly contained within a single CC | ≤ 2 |
| 64 QAM | > 8 or allocation extends across two CC's | > 12 or allocation extends across two CC's | > 16 or allocation extends across two CC's | > 18 or allocation extends across two CC's | ≤ 3 |
| 256 QAM | ≥ 1 | ≤ 5 | |||
For PUCCH and SRS transmissions, the allowed MPR is according to that specified for PUSCH QPSK modulation for the corresponding transmission bandwidth.
For intra-band contiguous carrier bandwidth class C with non-contiguous resource allocation, the allowed Maximum Power Reduction (MPR) for the maximum power output power is specified as follows
MPR = CEIL {min(MA, MIM5), 0.5}
Where MA is defined as follows for QPSK, 16 QAM and 64 QAM:
MA= 8.2 ; 0≤ A < 0.025
9.2 - 40A ; 0.025≤ A < 0.05
8 - 16A ; 0.05≤ A < 0.25
4.83 - 3.33A ; 0.25≤ A < 0.4
3.83 - 0.83A ; 0.4≤ A < 1
Where MA is defined as follows for 256 QAM:
MA= 8.2 ; 0≤ A < 0.025
9.2 - 40A ; 0.025≤ A < 0.05
8 - 16A ; 0.05≤ A < 0.16
5.5 ; 0.16≤ A < 1
and MIM5 is defined as follows:
MIM5 = 4.5 ; ΔIM5 < 1.5 * BW Channel_CA
6.0 ; 1.5 * BW Channel_CA < ΔIM5 < BW Channel_CA / 2 + FOOB
MA ; ΔIM5 < + BW Channel_CA / 2 + FOOB
For intra-band contiguous carrier aggregation bandwidth class B with non-contiguous resource allocation, the allowed Maximum Power Reduction (MPR) for the maximum output power in Table 6.2.2A-1 is specified as follows:
MPR = CEIL {MA, 0.5}
Where MA is defined as follows for QPSK, 16 QAM and 64 QAM:
MA = 10.5 - 17.5A ; 0≤ A < 0.2
8.5 - 7.5A ; 0.2≤ A < 0.6
5.5 - 2.5A ; 0.6≤ A < 1
Where MA is defined as follows for 256 QAM:
MA = 10.5 - 17.5A ; 0≤ A < 0.2
8.5 - 7.5A ; 0.2≤ A < 0.4
5.5 ; 0.4≤ A < 1
Where:
A = N RB_alloc / N RB_agg
ΔIM5 = max(| Fc_agg - (3*Fagg_alloc_low - 2*Fagg_alloc_high ) |, | FC_agg - (3*Fagg_alloc_high - 2*Fagg_alloc_low) |)
Fc_agg = (Fedge_high + Fedge_low) / 2
Disclaimer: Qorvo makes no representations or warranties of any kind, express or implied, about the completeness, accuracy, or reliability of the tools on this web page. In no event will Qorvo be liable to any user of these tools for any loss or damages, including without limitation, indirect or consequential damages arising out of or associated with the use of these tools.
| Modulation | CA bandwidth Class B and C / Smallest Component Carrier Transmission Bandwidth Configuration | MPR (dB) | |||
|---|---|---|---|---|---|
| 25 RB | 50 RB | 75 RB | 100 RB | ||
| QPSK | > 8 and ≤ 25 | > 12 and ≤ 50 | > 16 and ≤ 75 | > 18 and ≤ 100 | ≤ 1 |
| QPSK | > 25 | > 50 | > 75 | > 100 | ≤ 2 |
| 16 QAM | ≤ 8 | ≤ 12 | ≤ 16 | ≤ 18 | ≤ 1 |
| 16 QAM | > 8 and ≤ 25 | > 12 and ≤ 50 | > 16 and ≤ 75 | > 18 and ≤ 100 | ≤ 2 |
| 16 QAM | > 25 | > 50 | > 75 | > 100 | ≤ 3 |
| 64 QAM | ≤ 8 and allocation wholly contained within a single CC | ≤ 12 and allocation wholly contained within a single CC | ≤ 16 and allocation wholly contained within a single CC | ≤ 18 and allocation wholly contained within a single CC | ≤ 2 |
| 64 QAM | > 8 or allocation extends across two CC's | > 12 or allocation extends across two CC's | > 16 or allocation extends across two CC's | > 18 or allocation extends across two CC's | ≤ 3 |
| 256 QAM | ≥ 1 | ≤ 5 | |||
For PUCCH and SRS transmissions, the allowed MPR is according to that specified for PUSCH QPSK modulation for the corresponding transmission bandwidth.
For intra-band contiguous carrier bandwidth class C with non-contiguous resource allocation, the allowed Maximum Power Reduction (MPR) for the maximum power output power is specified as follows
MPR = CEIL {min(MA, MIM5), 0.5}
Where MA is defined as follows for QPSK, 16 QAM and 64 QAM:
MA= 8.2 ; 0≤ A < 0.025
9.2 - 40A ; 0.025≤ A < 0.05
8 - 16A ; 0.05≤ A < 0.25
4.83 - 3.33A ; 0.25≤ A < 0.4
3.83 - 0.83A ; 0.4≤ A < 1
Where MA is defined as follows for 256 QAM:
MA= 8.2 ; 0≤ A < 0.025
9.2 - 40A ; 0.025≤ A < 0.05
8 - 16A ; 0.05≤ A < 0.16
5.5 ; 0.16≤ A < 1
and MIM5 is defined as follows:
MIM5 = 4.5 ; ΔIM5 < 1.5 * BW Channel_CA
6.0 ; 1.5 * BW Channel_CA < ΔIM5 < BW Channel_CA / 2 + FOOB
MA ; ΔIM5 < + BW Channel_CA / 2 + FOOB
For intra-band contiguous carrier aggregation bandwidth class B with non-contiguous resource allocation, the allowed Maximum Power Reduction (MPR) for the maximum output power in Table 6.2.2A-1 is specified as follows:
MPR = CEIL {MA, 0.5}
Where MA is defined as follows for QPSK, 16 QAM and 64 QAM:
MA = 10.5 - 17.5A ; 0≤ A < 0.2
8.5 - 7.5A ; 0.2≤ A < 0.6
5.5 - 2.5A ; 0.6≤ A < 1
Where MA is defined as follows for 256 QAM:
MA = 10.5 - 17.5A ; 0≤ A < 0.2
8.5 - 7.5A ; 0.2≤ A < 0.4
5.5 ; 0.4≤ A < 1
Where:
A = N RB_alloc / N RB_agg
ΔIM5 = max(| Fc_agg - (3*Fagg_alloc_low - 2*Fagg_alloc_high ) |, | FC_agg - (3*Fagg_alloc_high - 2*Fagg_alloc_low) |)
Fc_agg = (Fedge_high + Fedge_low) / 2
Disclaimer: Qorvo makes no representations or warranties of any kind, express or implied, about the completeness, accuracy, or reliability of the tools on this web page. In no event will Qorvo be liable to any user of these tools for any loss or damages, including without limitation, indirect or consequential damages arising out of or associated with the use of these tools.